Labelling a Grid Connected Solar Installation course cover

Labelling a Grid Connected Solar Installation

June 25, 20252 min read

Labelling is the part of a solar install that most often gets a system sent back, and it’s almost always avoidable. This course takes you through every label the standards require, where it goes, and how to make it last.

A solar system can be installed perfectly and still fail its inspection on labelling. The requirements are spread across AS/NZS 5033 and AS/NZS 4777.1, they changed in 2021 and again in 2024, and cheap labels that fade or fall off in the weather are treated exactly the same as missing ones.

This course puts the whole picture together: the labels required at the inverter, the switchboard and on the roof, the correct wording and colours, where each one has to be positioned, and how to choose products that survive outdoors. It comes with our free Solar Labelling Checklist so nothing gets missed on site.

What you’ll learn

  • Every label required under AS/NZS 5033:2021 and AS/NZS 4777.1:2024, and where it goes
  • How to label the inverter, switchboard and rooftop equipment correctly
  • The wording, colours and positioning inspectors check
  • How to choose durable labels that stay legible in the weather
  • The labelling mistakes that most often lead to a failed inspection

Course content

Why labelling fails inspections

The standards involved, what changed in 2021 and 2024, and what inspectors look for first.

Labelling at the inverter and switchboard

Main switch naming, warning labels, PV site information and shutdown procedures.

Labelling on the roof

Disconnection points, DC conduit marking and isolator labels.

Label quality and common mistakes

Durable products, clear presentation, and the errors that get systems sent back.

This course includes

  • 20 CPD points (SAA accredited)
  • 45 minutes of on-demand video
  • Free Solar Labelling Checklist
  • Certificate of completion

Your presenter

Pat Southwell — Licensed Electrical Inspector

Pat inspects solar and battery installations across Victoria every week as a Licensed Electrical Inspector, with more than 7,000 inspections behind him. He co-hosts the Solar Sidekicks podcast and has trained over 1,000 installers through Southwell Solar Training.

Back to Blog

CPD Courses

Southwell Solar Training

Copyright 2026. Southwell Solar Group. All Rights Reserved